Scout Dust Sensor
Scout Dust Sensor
The Scout dust sensor has the same high quality of dust sensing as both the Atlas and the Titan sensors, but with an analog output signal. The sensor outputs both 0 - 10 vdc and 4 - 20 mA signal simultaneously. The sensor can be configured to output either instant or rolling average dust values. The rolling average period as well as the output scaling is user configurable using the on-board dip switches. The sensor handles all of the rolling average calculations, but you handle the alarming functions, including any alarm delays.
Features
| Parameter | Description / Value |
|---|---|
| Measurement Principle | Dynamic Induction |
| Measurement Range |
Detection Limit < 0.1 mg/m3 Max Several g/m3, depending on conditions |
| Rolling Average Output | Yes, setup with dip switches |
| Enclosure | Stainless Steel (IP65 / Nema 4X) |
| Analog Output | 0 - 10 vdc & 4 - 20 mA |
| Alarming | Trouble Alarm Only |
| Relay Output | Trouble Alarm |
|
Communication Interfaces |
None |
| Communication Protocol | None |
| Automated Self-Checks | None |
Specifications
| Parameter | Description / Value |
|---|---|
| Measurement Range |
Detection Limit < 0.1 mg/m3 Max Several g/m3, depending on conditions |
| Enclosure | Stainless Steel (IP65 / Nema 4X) |
| Weight |
7.0 lbs (3.2 kg) (without the rod) |
|
Dimensions (without rod) |
7" x 11" x 5" 178mm x 280mm x 127mm (W x H x D) |
| Ambient Temperature | -40 C to +70 C (-40 F to 158 F) |
| Power Supply | 24 VDC |
| Power Consumption | Less than 5 Watts |
|
Communication Interfaces |
1 x serial communications RS485 |
| Communication Protocols | Modbus RTU |
| Process Temperature |
Default 200 C (392 F) Optionally up to 1600 F (871 C) |
| Process Pressure | Default 3000 psi (20684 kPa) |
| Process Humidity | Max 95% RH (non-condensing) |
| Self-Checks | Automated |
| Self-Check Functions |
Electronic Drift Check (EDC) Rod Isolation Check (RIC) (US Patent 9482706B2) |
