|
Directions
to B3 Systems
If
you are coming directly from RDU Airport, here
is the fastest way to our offices.
Once
you see signs for the new 540 by-pass, you want
540 North.
At the stop light at the exit ramp make a left
turn (North)
Go approx. 0.5 miles to the second stop light.
Make a right turn onto Litchford Road.
Go approx. 0.8 miles to the first stop light.
Make a left turn onto Harps Mill.
Go approx. 0.5 miles to the first stop sign. Make
a left turn onto Gresham Lake.
Go approx. 0.5 miles and make a left turn onto
Welborn Street.
|
| |
From:
RDU via Interstate-40 |
*Click
here for map* |
| 1)
|
As
you leave the airport, take I 40 East. |
| 2)
|
Stay
on I-40 East until you see the Wade Ave. Extension,
exit to the right. |
| 3)
|
Follow
Wade Ave. until you seel signs for I-440 North (Inner
Beltline), take it. |
| 4) |
Stay
on I-440 North until you see the exit for Capital
Blvd (US 1). Exit North on US 1. |
| 5)
|
Stay
on US 1 for approximately 7 miles. Make a left turn
at Gresham Lake Road (the stop light just past the
Plantation Inn). |
| 6)
|
Go
approximately 1 mile (watch out for the rough rail-road
tracks) and make a right turn on Welborn Street.
|
| 7) |
After
you crest the knoll, you will see 7711 on your left.
Turn right in the next driveway and 3208 is the second buildingon the left.. |
| |
|
| |
From:
RDU via US-70 |
*Click
here for map* |
| 1)
|
Follow
US-70 until you reach the beltline and take I-440
North or East (the Inner Beltline). |
| 2)
|
Once
on the I-440 Beltline, follow the above I-40 directions
beginning with step 4. |
| |
|
| For
specific directions from anywhere in the United
States: |
| |
Visit
www.mapquest.com or
www.bellsouth.net
|
| |
|
| Disclaimer: |
| |
There
may be faster routes to our office, you are welcome
to try any you wish. Just keep our above office
phone number handy. |
